Skip to content

Account and Login Recovery

Account & Security 7 min read
On this page

The ordinary password reset does not fix a two-factor code you can no longer receive, an invite that was never activated, or an account that was deleted. Most of those need no support ticket. If you have only forgotten your password, start with Signing In and Resetting Your Password instead.

Start From the Message on Screen #

What you seeWhat it meansWhat to do
Wrong email or password, repeatedlyNo account exists on that address, or the password is wrongCheck the address. If it is right, see A Team Member Who Never Activated the Invite and The Account Was Deleted
Too many failed attempts. Please try again later.Too many wrong passwords in a row. The wait gets longer with each new attemptWait it out. See Signing In and Resetting Your Password
Access deniedThe IP address you are on is blockedTry another network, then contact support with the IP
The confirmation appears but no reset email arrivesSomething silently suppressed the sendReload the form and submit once. If you tried within the last 5 minutes, wait. An unverified address or an unactivated invite also sends nothing. See The Reset Email Never Arrives
Stuck on the Two-factor authentication screenYou cannot reach the mailbox or the authenticator app the code comes from, or the attempt budget is spentRead the message on screen. With an authenticator app, use a recovery code. A team member can ask the account owner or an Admin for a reset; an owner must contact support. See You Cannot Complete the Two-Factor Code
Invalid or expired activation link. Please contact the account owner to resend your invitation.An invite link that was already used or supersededAsk the account owner or an Admin to send the invite again

The Reset Email Never Arrives #

The forgot-password form answers "Please check your email and follow the instructions." whenever it recognizes the address, even when nothing was sent. An unknown address gets "We could not find any account with this e-mail address."

Two of the silent cases are product rules: the 5-minute per-account cooldown, and an address that was never verified. Signing In and Resetting Your Password documents both fixes. The hourly per-IP cap is the third rule there, but it shows an error instead of the confirmation: "Too many requests. Please try again later."

The remaining causes belong here:

  • The form's bot defense rejected the submit. Its token is single-use and expires 2 hours after the page loads. A reused or expired token sends nothing. Neither does an address whose domain cannot receive mail at all: one that publishes neither an MX nor an A record. Both answer with the same success message. Reload the page, check the domain, then submit once.
  • The address belongs to a member who never activated their invite. Ask the account owner or an Admin to send the activation link again.

If you have several addresses, request a reset for each one you might have signed up with as the account owner. The email goes only to the exact address on file. If it is a team member's seat, ask the account owner or an Admin for help instead.

You Cannot Complete the Two-Factor Code #

Two-factor sign-in uses one of two methods. With emailed codes, the code goes to the mailbox of whoever is signing in: a team member gets it at their own address, the owner at the owner's. With an authenticator app, nothing is emailed: the code comes from the app on that person's phone, and each of the 10 recovery codes saved at setup works once in its place.

If you have the mailbox but the code is refused, read the message instead of requesting more codes. Extra spaces are ignored, so a bad paste is rarely the cause.

  • "That code is incorrect. Check the newest email." Re-read the code in the latest email and enter it again. Each try spends one of the 5 attempts. With an app the message ends "Enter the current code from your app."
  • Your sign-in timed out. The pending sign-in lapsed after 1 hour. Click Sign in again.
  • Too many incorrect codes. The 5-attempt budget for this sign-in is spent, and Resend code (emailed codes only) cannot buy more. Click Sign in again.
  • "Too many incorrect codes. Try again in 15 minutes, or use a recovery code." Codes from your authenticator app were wrong 10 times in a row, counted across sign-ins, so app code entry is locked for 15 minutes. A recovery code still works during the lock. Click Use a recovery code, or wait 15 minutes.

If you use an authenticator app and have lost your phone, click Use a recovery code instead on the code screen and enter one of your saved recovery codes. Once signed in, replace the app and get a new set of codes under avatar menu → Settings → Security; Two-Factor Authentication has the steps.

If you are a team member who has lost the mailbox, or the phone and the recovery codes, the account owner or an Admin clears your factor from inside the product:

  1. Go to People → Users.
  2. Open the kebab menu on the member's row.
  3. Click Reset two-factor auth.

The item shows only for a member with two-factor authentication enabled, never on your own row or the owner's. The reset also removes the member's authenticator app and recovery codes. Uptimia emails the member and logs the change to the Recent access changes card on the same People → Users page. Their password still signs them in. To enroll again, they open the avatar menu (top right) → Settings → Security tab.

The Users roster with a team member's row menu open, showing Reset two-factor auth between Edit access & profile and Remove from account, and each user's 2FA on or 2FA off under Status.Enlarge

If you are the account owner and have lost the mailbox, or the phone and every recovery code, contact support from the email address on the account. No one else on the account can clear the owner's factor. Support verifies you are the owner first.

Two-Factor Authentication covers the factor itself; Inviting Team Members covers the seat lifecycle around it.

A Team Member Who Never Activated the Invite #

An invite is an activation link, and a seat that has not used it has no password yet:

  • The forgot-password form sends nothing for that address, and still reports success.
  • An invite link that has been superseded returns "Invalid or expired activation link. Please contact the account owner to resend your invitation."

The fix is to send the activation link again. The owner or an Admin opens People → Users and the kebab menu on the pending row, where Resend invite emails the same link and Copy invite link passes it on another way. Both items appear only while the seat is unactivated.

The Account Was Deleted #

Deleting an account cannot be undone, and support cannot restore it. Deletion clears the login token and the password, so no one can sign in again, and an old remember-me cookie or an old direct-access link is refused. Signing in shows Wrong email or password, the same message as an address that never existed.

If you want to monitor again, create a new account; Deleting Your Account lists what deletion removes and what survives.

A lapsed plan is a different thing, and it does come back. Dropping to a smaller plan suspends the monitors that no longer fit, keeping the oldest ones, and moving back up reactivates them in the same order. Monitors you paused by hand stay paused; an upgrade never touches a manual pause.

Don't Create a Second Account #

A new account has none of your monitors, history or settings, and you'll have two logins to untangle later. Work the case that matches yours, or contact support and verify your identity against the original account.

When to Contact Support #

Contact support when you are the account owner and can no longer receive your two-factor codes and have no recovery code left. Also contact support when your address was never verified and you cannot sign in to verify it, or when you see Access denied. Include these facts and support can answer in one round:

  • The exact email address you are signing in with.
  • Whether you are the account owner or a team member.
  • The on-screen message, word for word, and the time you saw it.
  • Whether that address has ever received email from Uptimia.

Was this helpful?

Your answer helps the team improve this article.

Still need help?

Uptimia Bot answers right away and passes you to the team when it can't.

Source: https://help.uptimia.com/help/a/account-login-recovery